Answer
Nov 07, 2024 - 11:15 AM
Do you have the same question? Follow this Question
Nov 07, 2024 - 11:15 AM
View all DTF Ink for Epson based Printers Questions & Answers
We’ve provided several answers to questions related to JUST IRON, AND DONE. Custom Printed DTF Transfers: iron press transfer to any fabric type , see some other helpful Q&A related to this product.
Question: How should DTF transfers be applied?
Answer:
Ensure your fabric surface is thoroughly cleaned and dried before application, and adhere to the manufacturer's guidelines for temperature and pressure settings for the heat press transfer stage. Insufficient (or too much) heat or pressure during the heat press process may prevent the design from adhering properly during transfer. Additionally, ensure even pressure distribution and precise timing to guarantee optimal results on any fabric type. Optimal settings will vary depending on the type of DTF film you are using and based on the Heat Press you are using, and will also depend on the type of ink and powder you are using, but these are some generally good suggestions for starting points to consider:
For Cotton: 300 F / 15 Sec
For Polyester or Tri-Blends: 275 F / 10 Sec
For 50/50 Cotton/Poly Blends: 300 F / 12 Sec
Use 60 PSI Pressure on all fabric types.
See below instruction guide for the entire DTF transfer process.
A post-press is highly recommended, and although this can be done with Kraft or Parchment Paper, for the ultimate in wash-fastness, durability and stretch-ability of your DTF-created apparel, post press your transfer with the DTFPRO MagicSeal.
View all DTF PRO Direct to Film Textile Ink for Epson engines Questions & Answers