Answer
Jan 23, 2025 - 05:15 PM
Adding a laser system to your heat press can improve the accuracy and consistency of your heat transfer placements. This feature is integrated our DBLDBL V2 and V3 Heat Presses. However, you could add a red cross standalone laser , paired with a small battery pack , to any heat press setup, such as the below example sold on Amazon for under $50:
-Position and Adjust the Lasers: Use the adjustable knobs to position the lasers so that they align with the intended placement area on your substrates.
-Test and Calibrate: Place a test garment or substrate under the heat press and project the laser guides onto it. Make fine adjustments as needed to ensure the lasers are perfectly aligned.
-Lock in the Position: Once the lasers are aligned correctly, lock their positions to prevent any movement during use.When you're ready to press, place your designs using the laser guides to check alignment before lowering the press.
-Position and Adjust the Lasers: Use the adjustable knobs to position the lasers so that they align with the intended placement area on your substrates.
-Test and Calibrate: Place a test garment or substrate under the heat press and project the laser guides onto it. Make fine adjustments as needed to ensure the lasers are perfectly aligned.
-Lock in the Position: Once the lasers are aligned correctly, lock their positions to prevent any movement during use.When you're ready to press, place your designs using the laser guides to check alignment before lowering the press.
