Answer
Nov 20, 2025 - 04:48 PM
You don't need to have the xTool OS1 Automatic Shaker Oven (although it would help streamline your operation) - it is not required. You could use manual powdering, and curing in a Heat Station such as the DTFLINE Heatstation V3. After printing on the PET film, you will need to:
- Manually apply the DTF adhesive powder evenly over the printed areas.
- Carefully place the powdered PET film into your baking oven (such as DTFLINE Heatstation V3)
- Heat the film until the adhesive powder melts and forms a smooth, even layer. Once the powder is fully melted and cured, the film is ready for heat pressing onto your garment.
