Staff Answer
Jul 21, 2026 - 08:18 AM
The main differences between the DTFLINE VANTAGE printers are the number and type of printheads, production speed, and the level of daily output they are designed to handle. All four models are professional direct-to-film printers, but each is intended for a different production volume and budget.
| Model | Printheads | Approximate Speed | Best For |
|---|---|---|---|
| VANTAGE CORE | Single Epson XP600 | Approximately 12-16 sq. ft. per hour | Startups, smaller shops, and businesses entering DTF printing |
| VANTAGE | Single Epson DX7 | Up to approximately 18 sq. ft. per hour | Shops that want a durable professional single-head platform |
| VANTAGE II | Dual Epson XP600 | Up to approximately 25 sq. ft. per hour | Growing businesses that need significantly faster production |
| VANTAGE II MAX | Dual Epson i1600 | Up to approximately 35 sq. ft. per hour | Higher-volume shops that need the fastest VANTAGE configuration |
VANTAGE CORE
The VANTAGE CORE is the most affordable entry point into the VANTAGE line. It uses a single Epson XP600 printhead and produces approximately 12-16 square feet per hour. It is a good choice for a startup, home-based business, or smaller print shop that wants professional roll-fed DTF production without investing in a higher-output dual-head system.
VANTAGE
The standard VANTAGE uses a single Epson DX7 printhead and produces up to approximately 18 square feet per hour. Compared with the VANTAGE CORE, it provides a modest increase in speed and uses the proven DX7 printhead platform. It is suited for businesses that want dependable professional production but do not yet require dual-head output.
VANTAGE II
The VANTAGE II uses two Epson XP600 printheads instead of one. One printhead can handle the color inks while the second handles white ink, allowing the printer to produce transfers more efficiently. With speeds of up to approximately 25 square feet per hour, it offers a substantial production increase over both single-head VANTAGE models.
VANTAGE II MAX
The VANTAGE II MAX is the fastest model in the VANTAGE range. It uses two Epson i1600 printheads and produces up to approximately 35 square feet per hour. The i1600 printheads offer greater nozzle capacity and are designed for businesses that need higher daily output, faster turnaround times, and a more production-oriented system.
Which VANTAGE printer should you choose?
- Choose the VANTAGE CORE if your priority is the lowest initial investment.
- Choose the VANTAGE if you prefer a professional DX7-based single-head system.
- Choose the VANTAGE II if you need a meaningful increase in production speed.
- Choose the VANTAGE II MAX if speed and higher-volume production are your primary priorities.
Actual production speed can vary depending on artwork size, print resolution, pass settings, RIP software settings, image nesting, and the amount of white ink required.
