Do you have the same question? Follow this Question
Oct 21, 2024 - 02:02 PM
Acrorip supports printers based on their underlying printer engine (Epson engine). Whether Acrorip will work on a DTG M2 or any other brand of DTG or DTF printer, depends on what the underlying Epson engine is that is used in your printer. Most DTG and DTF printers use Epson engines, so check with your printer manufacturer what engine is used in yours (you can also tell based on printhead).
View all RIP Software: DTFRIP | DTGRIP | UVRIP | TRANSFERRIP Questions & Answers
We’ve provided several answers to questions related to ACRORIP V10.7, works for DTF, DTG and UV Printers | DTFRIP and DTGRIP Software , see some other helpful Q&A related to this product.
Question: Epson L1800 Printer Feeds Film all the way thru but doesn't print - then says "out of paper" ? using Acrorip V10
Answer: If you are facing any issues with your DTF Printer not Grabbing /Feeding the DTF Film properly, I would suggest please check the following as it would surely help you resolve the issue.
1- Make sure you do NOT feed the film in a traditional way (which is upright position) but have it slant/bulge a bit up-close to the White hooks of the printer which pulls the sheets through it after you give a print command. Here is a very good video on the same.
https://www.youtube.com/watch?v=X5YgjXhUYpo
2- For Sheets, you must always use 4-5 sheets of film at the same time in the feeding tray. Using a single sheet can cause issues.
3- Please make sure to place the printable side up. You can check on the packaging to see which side is printable.
4- If required, you can also try applying a masking tape at the bottom edges of the non-printable side, where the transfer film is initially making contact with the rollers in order to be fed into the printer.
5- Always check if the Paper Rollers of the printer are clean as the film has a special powder coating on it and it makes the rollers ''slippery'' when the printer is used on a regular basis.
6- In Printing Preferences, make sure to select the exact document Size you are using and always change it according to the size of the transfer film you are using.
7- You should have your “PAPER CHECK SIZE” = OFF if you are using Acrorip software.
Hope these Tips/Suggestions above will help you resolve the issues with paper feeding in your DTF PRINTER and if you have any other questions or suggestions to make, please feel free to contact us anytime!
Question: What is the "one pass" feature?
Answer: The "one pass" feature in the ACRORIP software allows for simultaneous white and color printing, eliminating the need for two passes when printing on dark t-shirts or products. This capability saves time and enhances print quality, particularly on darker materials.
View all ACRORIP V10.7, works for DTF, DTG and UV Printers | DTFRIP and DTGRIP Software Questions & Answers
